Introduction to the working principle and positioning method of automatic positioning dynamic balancing machine
Published:
2020-03-19 10:44
Today, the automatic positioning dynamic balancing machine has been used in the field of rotating workpiece manufacturing. It not only solves the first important safety problem in the production of rotating workpieces, but also accelerates the efficiency of product quality improvement. How does the dynamic balancing machine work? What are its working principles and positioning methods? With so many questions, let's work with Zhuo Xuanjin to make a comprehensive understanding of the automatic positioning dynamic balancing machine.
First, positioning method
There are up to dozens of positioning methods for automatic positioning dynamic balancing machines. Here we just briefly talk about the mainstream technologies: infrared positioning and slot positioning. So what are the principles and characteristics of these positioning methods? As described below, the advantages of infrared positioning are: easy to install, high accuracy but easy to be affected by the surrounding light intensity, and easy or contaminated surface to cause induction failure; : High positioning accuracy without the need for other positioning facilities. The disadvantage is that it is not easy to install.
Working principle
The working sequence of the automatic positioning dynamic balancing machine is: after placing the rotating workpiece to be measured at the measuring station and receiving the start instruction, the measuring system performs centrifugal force calculation and data analysis according to the preset balance accuracy requirements and the imbalance stop position. , From which the magnitude of the imbalance is output, and the rotating workpiece in the intelligent control measurement stays at the preset angle position after the calibration is completed. Then the automatic positioning dynamic balancing machine starts, calculates whether the centrifugal force of the rotating workpiece reaches the preset balance accuracy and then completes the calibration, and reports the accuracy and status of the rotating workpiece to the measurement system.
In this regard, Zhuo Xuanjin said that to maximize the effect of an automatic positioning dynamic balancing machine product, as a consumer must clearly understand the internal structure and principle of the product. To understand and use in accordance with regulations, so as not to undermine the safe operation of the automatic positioning dynamic balancing machine.
Related news
2018-12-03
In addition, if you need to buy a balance test machine, please contact us directly.
2018-12-03
Safety operation of the rotor of the motor to be balanced
電機轉子裝配工的一般操作規程如下: 1、工作前，整理場地，放穩各零、部件，并檢查裝配使用工具和工作環境是否安全良好。 2、吊放電機機座、底板、定子、轉子、軸承等大型部件時必須放好方箱或墊木...
2018-12-03
Rubber roller dynamic balancing machine customer site
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances
2018-12-03
Mainly used in micro-motor rotors, such as automotive motors, household electrical appliances, micro-motors
2018-12-03
[Guangzhou Zhuo Xuanjin] balance machine application range
Dynamic balancing machines are widely used and can be divided into ten categories
2018-12-03
Guangzhou Zhuo Xuanjin various balance machines and their application range
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances, cooling fans, motors, generators, pumps, automobiles, printing, rollers and other industries.