What factors affect the measurement of the balance machine?
Published:
2019-10-21 11:13
The amount of imbalance that occurs during the daily production of a rotating object is the main cause of product failure. Therefore, it needs to be corrected by a dynamic balancing machine, but in fact, we do not understand the dynamic balancing machine. There are many influencing factors when measuring the balance machine. The following small series will be introduced to you.
1. The transmission belt does not meet the requirements and there are obvious seams.
2. The output signal of the sensor is not normal.
3. The fastening screws at the parts that can be moved on the support frame are not fastened.
4. The height of the left and right supports is high and low, so that the rotor is tilted left and right or the plane of the journal is rubbed against the support.
5, the foundation of the installation balance machine does not meet the requirements, the bottom joint surface is not solid, the anchor bolts are not fastened, or placed on the floor, causing resonance.
6. The bearing block is seriously worn or the roller jumps.
7, there is dirt at the support, no lubrication.
8. The photoelectric head of the dynamic balancing machine is not aligned with the reflective paper, the mirror surface of the photoelectric head is blurred, and the position of the photoelectric head is skewed to cause angular deviation.
The above factors will affect the measurement of the balance machine. We should pay attention to the above factors when using the balance machine for dynamic balance measurement, in order to better obtain the experimental results and avoid the error!
Related news
2018-12-03
In addition, if you need to buy a balance test machine, please contact us directly.
2018-12-03
Safety operation of the rotor of the motor to be balanced
電機轉子裝配工的一般操作規程如下: 1、工作前，整理場地，放穩各零、部件，并檢查裝配使用工具和工作環境是否安全良好。 2、吊放電機機座、底板、定子、轉子、軸承等大型部件時必須放好方箱或墊木...
2018-12-03
Rubber roller dynamic balancing machine customer site
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances
2018-12-03
Mainly used in micro-motor rotors, such as automotive motors, household electrical appliances, micro-motors
2018-12-03
[Guangzhou Zhuo Xuanjin] balance machine application range
Dynamic balancing machines are widely used and can be divided into ten categories
2018-12-03
Guangzhou Zhuo Xuanjin various balance machines and their application range
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances, cooling fans, motors, generators, pumps, automobiles, printing, rollers and other industries.