Maintenance and maintenance of double-sided vertical balancing machine
Published:
2019-07-09 10:32
Nowadays, with the development of technology, more and more manufacturers are demanding the improvement of product quality. Double-sided vertical balancing machine is very popular in the market, but we really understand the double-sided vertical balancing machine. Is there some common maintenance work after applying the double-sided vertical balancing machine?
1. Equipment is adjusted every 6 months
2. Never use compressed air or water jets to remove dust and debris from the equipment. Prevent dust from entering the building and cleaning operations.
3. Maintain the balance shaft, nut, cone and flange cleaning. If these parts are cleaned, use a brush soaked in a neutral solution to clean them.
4. Be careful to use cones and flanges to prevent accidental drops and damage. The result is an accurate centering that, after application, places the cone and flange in a dust-tight space.
5. The bearings of the components must be inspected and lubricated regularly by the operator. Do not open the bearing during the test. Just insert a screwdriver and check the sound. Because the bearing is clamped and supported, it is not suitable for replacing or removing grease; adjust the equipment after replacing the grease. In addition, it is not very fast for the equipment, so there is no need to replace the grease. If you notice that the bearing is working abnormally or is noisy, replace the bearing. If the lubrication is replaced incorrectly, it will affect the precision of the equipment. In this case, reinstall the seal, reinstall, and repeat the adjustment.
The precision of the dynamic balancing machine is an important indicator to check the quality of the dynamic balancing machine. A slight error error will cause a large impact on the dynamic balancing machine. Therefore, more consideration should be given to the selection of dynamic balancing machines. Guangzhou Zhuo Xuan Jin dynamic balancing machine manufacturers of high-precision dynamic balancing machine, will bring you a completely different experience. Guangzhou Zhuo Xuanjin is a well-known dynamic balancing machine supplier specializing in the independent research and development of dynamic balancing machines. The product has high precision, high reliability, structural design with beautiful appearance, small size and light weight. Choosing Guangzhou Zhuo Xuan Jin Dynamic Balancing Machine is your best choice. Zhuo Xuan Jin dynamic balancing machine, trustworthy!
next page
Related news
2018-12-03
In addition, if you need to buy a balance test machine, please contact us directly.
2018-12-03
Safety operation of the rotor of the motor to be balanced
電機轉子裝配工的一般操作規程如下: 1、工作前，整理場地，放穩各零、部件，并檢查裝配使用工具和工作環境是否安全良好。 2、吊放電機機座、底板、定子、轉子、軸承等大型部件時必須放好方箱或墊木...
2018-12-03
Rubber roller dynamic balancing machine customer site
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances
2018-12-03
Mainly used in micro-motor rotors, such as automotive motors, household electrical appliances, micro-motors
2018-12-03
[Guangzhou Zhuo Xuanjin] balance machine application range
Dynamic balancing machines are widely used and can be divided into ten categories
2018-12-03
Guangzhou Zhuo Xuanjin various balance machines and their application range
Mainly used in the balance correction of high-speed rotating workpieces in various household appliances, cooling fans, motors, generators, pumps, automobiles, printing, rollers and other industries.